این محصول در انبار موجود نیست
اخطار: آخرین موجودی فعلی!
تاریخ در دسترس بودن
By buying this product you can collect up to 240000 loyalty points. Your cart will total 240000 loyalty points that can be converted into a voucher of 48,000 تومان.
1. OAG body(with 1.25″ holder and 5mm extender and M42 adapter)
2. M48 adapter for main imaging camera(in the box)
3. M48-M42 adapter for telescope and flat lens(in the box)
4. Hexagon wrench(in the box)
1. please caculate the correct required distance for your imaging train at first
for example: you need to attach 21mm extender to ASI071 to reach 55mm back focus distance:17.5mm+21mm+16.5mm=55mm
2. Take off the guider prism part and attach OAG body to the telescope
3. Insert the prism part into the OAG body
4. Mount the guide camera
5. Screw the T2 or M48 adaper on the imaging camera according to your the mount type
6. Mount the camera on the OAG in correct position and lock the 3 screws
7. The final setup
Note: please make sure the prism won’t block the imaging area
Use the guiding screw to adjust the guiding camera’s focus.
You’d better do it at day time to make sure imaging camera and guiding camera can reach focus at the same position.
No customer reviews for the moment.